GERSTEL Preparative Fraction Collector
(PFC) for Gas Chromatography
The GERSTEL PFC automatically collects compounds
after gas chromatographic separation. The PFC is
equipped with six sample traps and one waste trap.
Traps are available in 1 µl or 100 µl
volumes.
For optimum compound recovery, the PFC can be equipped with optional LN2 or cryostatic
trap cooling systems.
The GERSTEL PFC allows for the collection of individual
compounds, a series of compounds, or specific classes
of compounds. Thanks to microprocessor control,
trap switching times can be selected to within
0.01 minutes. This permits reliable collection
of individual compounds that are closely resolved.
The equipment is designed so that there are no
valves or cold spots in the sample flow path to
ensure maximum transfer efficiency.
The reliability and reproducibility of the system
makes it possible to trap compounds over the course
of hundreds of injections. This makes it possible
to further analyse the fractions by techniques
requiring larger sample mass such as for NMR or
IR.
The system can be controlled by means of a hand-held
GERSTEL-MAS Controller 505 keypad and/or GERSTEL-MASter
software.
The GERSTEL PFC can be used with all common gas
chromatographs but when used with the Agilent 6890N/Chemstation
can have software integrated into the Chemstation
for single system control.
Ten good reasons for choosing a GERSTEL PFC
Technical Data
| Trap switching |
0.01 min resolution
|
| Trap heating |
up to 250 °C
|
| Trap cooling |
LN2 cooling system
down to -150 °C,
cryostatic cooling
depends on cryostat
(typically -20 °C)
|
| Height |
400 mm
|
| Length |
320 mm
|
| Width |
380 mm
|
| Weight |
12 kg
|
Recommended Accessories:
GERSTEL
MASter software
Fully Integrated into Agilent MSD and GC Chemstations for one Chemstation method
and sequence control of the total system.
This is software for programming methods and sequences for all GERSTEL modules
and systems.
|
